Инструкции Пользователя для Electrolux EI23CS55GS

 

1  Remove the two screws from each cover 

over the top door hinges.

 

2  Lift hinge cover straight up and off.

 

1  Detach the multi-wire cable connector 

located above the top hinge. Grasp both 
sides of the connector firmly and pull apart.

 

3  Detach the water tube from the connector  

located below the freezer door. The 
connector releases when you press its outer 
sleeve inward.

 

4  Remove the screws from the top hinge and  

pull the multi-wire cable through it. Lift the   
door off of the bottom hinge.

 

5  Remove the two bottom hinge screws and   

hinge if necessary.

  

6  Lay the door on its side to avoid damage to  

the water tube extending from the bottom    
hinge.

To reinstall the freezer door, reverse the above 
steps. 

Once both doors are in place, ensure they are 
aligned with each other and level (Please see “To 
level the doors using the lower hinge” for models 
with adjustable lower hinges or “To level the 
cabinet using the front rollers” for models with the 
non-adjustable lower hinges in the “Installation” 
section.), then replace the top hinge cover.

 

2  Trace lightly around the hinge with a pencil.  

This makes reinstallation easier.