Инструкции По Установке для Philips 23HFL2809D/12
26
11.
Welcome Logo
Once this feature is configured and set, the welcome image will be displayed within 8 seconds after switch on. This
page will remain until a key on the RC is pressed.
page will remain until a key on the RC is pressed.
How to upload Welcome Logo
1. Create a graphics file: 960 x 540.png with the logo. Follow the next guidelines:
Maximum size of the welcome logo should be less than 150 Kb.
Always use 16 bit color depth.
Always use 16 bit color depth.
2. File name: hotel_wel.png (File name is case-sensitive)
3. Create a folder named “welcome_image” on your USB key.
4. Save the image into the “welcome_image” folder on you USB key.
5. Insert the USB device into TV.
6. Enter the Hotel Mode.
7. Select the option: Copy from USB.
8. Make sure that option Welcome screen is set to ON
Note: For the welcome picture, there is a color lookup table used that is limiting the number of colors available to
display. This can result in certain display color artifacts and using a limited number of different color values can
improve this. Once this feature is configured and set the welcome image will be displayed within 8 seconds after
switch on. This page will remain until a key on the RC is pressed.
3. Create a folder named “welcome_image” on your USB key.
4. Save the image into the “welcome_image” folder on you USB key.
5. Insert the USB device into TV.
6. Enter the Hotel Mode.
7. Select the option: Copy from USB.
8. Make sure that option Welcome screen is set to ON
Note: For the welcome picture, there is a color lookup table used that is limiting the number of colors available to
display. This can result in certain display color artifacts and using a limited number of different color values can
improve this. Once this feature is configured and set the welcome image will be displayed within 8 seconds after
switch on. This page will remain until a key on the RC is pressed.