Справочник Пользователя для DELL C4130
Menu Item
Description
X2Apic Mode
Enables or disables the X2Apic mode.
Number of Cores per Processor
Controls the number of enabled cores in each processor. By
default, the Number of Cores per Processor option is set to
All.
default, the Number of Cores per Processor option is set to
All.
Processor 64-bit Support
Specifies if the processor(s) support 64-bit extensions.
Processor Core Speed
Displays the maximum core frequency of the processor.
Processor 1
NOTE: Depending on the number of installed CPUs,
there may be up to four processor listings. The following
settings are displayed for each processor installed in the
system.
there may be up to four processor listings. The following
settings are displayed for each processor installed in the
system.
Family-Model-Stepping
Displays the family, model and stepping of the processor as
defined by Intel.
defined by Intel.
Brand
Displays the brand name reported by the processor.
Level 2 Cache
Displays the total L2 cache.
Level 3 Cache
Displays the total L3 cache.
Number of Cores
Displays the number of cores per processor.
SATA Settings screen
You can use the SATA Settings screen to view the SATA settings of SATA devices and enable RAID on
your system.
You can view the SATA Settings screen by clicking System Setup Main Menu → System BIOS → SATA
You can view the SATA Settings screen by clicking System Setup Main Menu → System BIOS → SATA
Settings.
The SATA Settings screen details are explained below.
The SATA Settings screen details are explained below.
Menu Item
Description
Embedded SATA
Enables the embedded SATA to be set to Off, ATA, AHCI, or RAID modes.
By default, the Embedded SATA option is set to AHCI.
By default, the Embedded SATA option is set to AHCI.
Security Freeze Lock
Sends Security Freeze Lock command to the Embedded SATA drives
during POST. This option is only applicable to ATA and AHCI mode.
during POST. This option is only applicable to ATA and AHCI mode.
Write Cache
Enables or disables the command for Embedded SATA drives during
POST.
POST.
Port A
Sets the drive type of the selected device. For Embedded SATA settings
in ATA mode, set this field to Auto to enable BIOS support. Set it to OFF
to turn off BIOS support.
For AHCI mode or RAID mode, BIOS always enables support.
in ATA mode, set this field to Auto to enable BIOS support. Set it to OFF
to turn off BIOS support.
For AHCI mode or RAID mode, BIOS always enables support.
Model
Displays the drive model of the selected device.
Drive Type
Displays the type of drive attached to the SATA port.
Capacity
Displays the total capacity of the hard drive. The field is undefined for
removable media devices such as optical drives.
26