Справочник Пользователя для DELL C4130

Menu Item

Description

In-System Characterization

This option enables or disables In-System
Characterization. By default, In-System
Characterization is set to Disabled. The two other

options are Enabled and Enabled - No Reboot.

NOTE: The default setting for In-System
Characterization is subject to change in
future BIOS releases.

When enabled, In-System Characterization (ISC)

executes during POST upon detecting relevant

change(s) in system configuration. This helps in

optimizing the system power and performance.

ISC takes about 20 seconds to execute, and system

reset is required for ISC results to be applied. The

Enabled - No Reboot option executes ISC and

continues without applying ISC results until the

next time system reset occurs. The Enabled option

executes ISC and forces an immediate system

reset so that ISC results can be applied. It takes the

system longer to be ready due to the forced

system reset. When disabled, ISC does not execute.

About Boot Manager

Boot Manager enables you to add, delete, and arrange boot options. You can also access System Setup

and boot options without restarting the system.

Entering Boot Manager

The Boot Manager screen enables you to select boot options and diagnostic utilities.

Turn on or restart your system.

2. Press F11 when you see the message F11 = Boot Manager.

If your operating system begins to load before you press F11, allow the system to finish booting, and
then restart your system and try again.

Boot Manager main menu

Menu Item

Description

Continue Normal Boot

The system attempts to boot to devices starting
with the first item in the boot order. If the boot
attempt fails, the system continues with the next