Справочник Пользователя для DELL C4130
Installing a processor
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
2.
Keep the Phillips #2 screwdriver ready.
3.
If you are upgrading your system (from a single processor system to a dual processor system or a
processor with a higher processor bin) download the latest system BIOS version from dell.com/
support and follow the instructions included in the compressed download file to install the update
on your system.
NOTE: You can update the system BIOS by using Lifecycle Controller.
4.
5.
NOTE: If you are installing a single processor, it must be installed in socket CPU 1.
Steps
1.
1.
Unpack the new processor.
2. Locate the processor socket.
3. If applicable, remove the socket protective cap.
3. If applicable, remove the socket protective cap.
4. Release the open first socket release lever near the unlock icon
by pushing the lever down and
out from under the tab.
5. Release the close first socket release lever near the lock icon
by pushing the lever down and out
from under the tab. Lift the lever 90 degrees upward.
6. Hold the tab near the lock symbol on the processor shield and lift it up and out of the way.
CAUTION: Positioning the processor incorrectly can permanently damage the system board
or the processor. Be careful not to bend the pins in the socket.
or the processor. Be careful not to bend the pins in the socket.
CAUTION: While removing or reinstalling the processor, wipe your hands of any
contaminants. Contaminants on the processor pins such as thermal grease or oil can damage
the processor.
contaminants. Contaminants on the processor pins such as thermal grease or oil can damage
the processor.
7. Align the processor with the socket keys.
CAUTION: Do not use force to seat the processor. When the processor is positioned
correctly, it engages easily into the socket.
correctly, it engages easily into the socket.
8. Align the pin-1 indicator of the processor with the triangle on the socket.
9. Place the processor on the socket such that the slots on the processor align with the socket keys.
9. Place the processor on the socket such that the slots on the processor align with the socket keys.
CAUTION: Do not use force to seat the processor. When the processor is positioned
correctly, it engages easily into the socket.
correctly, it engages easily into the socket.
10. Close the processor shield.
11. Lower the close first socket release lever near the lock icon
and push it under the tab to lock it.
69