Справочник Пользователя для StarTech.com SV431-DVIUA

Instruction Manual

3

There are two options for connecting slave computers to SV431DVIUA:
1.  a) Using a Male to Male DVI-D (Single Link) cable, connect the computer’s DVI port 

to one of the four available PC ports (PC 1, PC 2, PC 3, PC 4) as shown below. 

 

b) Using a USB A-B Cable, connect the USB port that corresponds with the PC port 

used in step 1, to the USB port on the corresponding computer, as shown below.

2.  Use a 4-in-1 USB, DVI, Audio and Microphone KVM Switch cable, such as 

USBDVI4N1A15 to connect each computer to the desired port. For more 

information, please see Accessory Products from StarTech.com.

Repeat steps 1a and 1b or and 2 to connect the remaining computers to the available 

ports. Devices and computers that are connected to SV431DVIUA can now be 

turned on.

Male to Male DVI

One  USB  patch  cable 

for  both  keyboard  and 

mouse