Справочник Пользователя для Savin C2824

Printing Functions

27

❒ Your service representative can

customize this feature with the fol-
lowing settings. Bracketed values
are defaults. 
• Reduction (on)
• Print split mark (on)
• Overprinting (on)
• Overprinting length (10mm)
• Guideline for split (when mes-

sage is 20mm longer than pa-
per)

❒ You can adjust the overprinting

and reduction lengths within the
following ranges:
• Guideline for split: 0

∼155mm

(5mm steps)

• Overprinting length: 4mm,

10mm, 20mm, 40mm

Normally, received pages are printed
and stacked on the tray in the order
they are received. If you turn this fea-
ture on, the machine will start print-
ing the message from the last page
received.

❒ By default, this feature is turned

off. Switch it on with the Initial Set-
up RX. 

⇒ P.90 “Initial Setup RX”

❒ When this feature is on, the first

page will be printed last.

❒ This feature uses Memory Recep-

tion.

If you turn this feature on and you re-
ceive a message that is longer than the
paper in the cassette, usually the ma-
chine prints it on two pages. The ma-
chine reduces the width and length of
the received image so that it will fit on
one page. If A4

L paper size is loaded

and a message of B4 

L size is re-

ceived, the machine will reduce the
message to a single A4

L sheet.

❒ By default, this feature is turned

off. Switch it on with the User Pa-
rameters. 

⇒ P.130 “Changing the

User Parameters”(Switch10, Bit3)

P.26 “Page Separation and Length Re-
duction (Not Available in Some Coun-
tries)”

your machine

Print

ND1X01E2

Nd1x01e2.eps

your machine

reduction

(A4 size)

(B4 size)

ND1X01E3

Nd1x01e3.eps