Справочник Пользователя для Citizen Systems CD-S500 Series

1

. Pressing  the  FEED  switch  twice  in

maintenance mode (POWER LED is
flashing) causes the POWER LED, PAPER
OUT LED, and the ERROR LED to begin
to flash.

2

. Reopening and closing the front cover in

this status switches the POWER LED,
PAPER OUT LED, and the ERROR LED
from flashing to continuously lit status.

3

. Pressing the FEED switch for 3 seconds or

more restores settings to the factory
shipping (initialized) status.

Flashing

 Press twice

Reopening and closing the front cover:
 Flashing       Lit

Functions that are not supported by the specifications at time of shipping have no
impact on printer operation even when the settings are changed.
Examples) Items set for the Auto-Cutter in models that are not equipped with an

Auto-Cutter.
Change of the setting of the Take-Up Device in models to which rewinder
specifications do not apply.

Color Ribbon

ON

ON

OFF

Take-Up Device

ON

ON

Set item

Initial value

Setting value

Remarks

Selects the color function.
During OFF, the change color command is ignored.

Selects the rewinder function.
During OFF, the rewinder motor does not operate.

The minimum cutting interval is 1/2 inch (3 lines with 6LPI).
Once a cut command has been executed, even if a command is sent before the paper
has fed at least 1/2 inch, the cut command is ignored so the cut action cannot be
executed.