Справочник Пользователя для Intel DP965LT

Intel Desktop Board DP965LT Product Guide

Main Memory

NOTE

To be fully compliant with all applicable Intel

SDRAM memory specifications, the

board should be populated with DIMMs that support the Serial Presence Detect (SPD)
data structure. If your memory modules do not support SPD, you will see a
notification to this effect on the screen at power up. The BIOS will attempt to
configure the memory controller for normal operation.

The desktop board supports the dual or single channel memory configurations defined
below.
• Four 240-pin Double Data Rate 2 (DDR2) SDRAM Dual Inline Memory Module

(DIMM) connectors with gold-plated contacts.

• Support for:

⎯  Unbuffered, non-registered single or double-sided DIMMs
⎯  Non-ECC DDR2 800/667/533 MHz memory
⎯  Serial Presence Detect (SPD) memory only
⎯  Memory configurations listed below:

•  Up to 2.0 GB utilizing 256 Mb technology
•  Up to 4.0 GB utilizing 512 Mb or 1 Gb technology
•  Up to 8.0 GB utilizing 1 Gb technology

Related Links:

Go to the following links or pages for more information about:
• The latest list of tested memory,

http://support.intel.com/support/motherboards/desktop/

• SDRAM specifications,

http://www.intel.com/technology/memory/

• Installing memory, page 33 in Chapter 2

Intel

P965 Express Chipset

The Intel P965 Express Chipset consists of the following devices:
• Intel P965 Express Chipset Memory Controller Hub (MCH)
• Intel 82801HB I/O Controller Hub (ICH8)

Related Links:

Go to the following link for more information about the Intel P965 Express Chipset:

http://developer.intel.com/design/nav/pcserver.htm