Справочник Пользователя для Viewsonic N1700w
ViewSonic N1700w 27
OSD and Power Lock Settings
1.
OSD LOCK TOGGLE – [MENU] + [LEFT] Press and Hold for 5 Seconds.
When successful, the following message shall appear. This message
shall appear for 10 seconds, then automatically be dismissed. At which
point, the main OSD (only) shall be disabled. To Re-enable, the user must
again press this key combination.
When successful, the following message shall appear. This message
shall appear for 10 seconds, then automatically be dismissed. At which
point, the main OSD (only) shall be disabled. To Re-enable, the user must
again press this key combination.
SYSTEM
INFO
SYSTEM INFO
TO UNLOCK THE OSD PRESS [MENU] + [LEFT] at Same Time for 5 Seconds.
2. POWER LOCK – [MENU] + [RIGHT] Press and Hold for 5 Seconds.
When successful, if power is ‘lost’ (i.e. Pull the plug), the monitor shall
automatically turn back on and return to it’s prior and exact upon
restoration of power. An Indication message will appear as follows:
automatically turn back on and return to it’s prior and exact upon
restoration of power. An Indication message will appear as follows:
SYSTEM
INFO
SYSTEM INFO
TO TOGGLE PRESS [MENU] + [RIGHT] at same time for 5 Seconds.
Applicable values for XXX = “ ON” (note Leading Space), and “OFF”
depending on the current state of this feature.
depending on the current state of this feature.