Справочник Пользователя для ZyXEL Communications VMG5313-B10A/ VMG5313-B30A
Chapter 9 Routing
VMG5313-B10A/-B30A Series User’s Guide
161
9.5.1 The RIP Screen
Click Network Setting > Routing > RIP to open the RIP screen.
Figure 65
RIP
The following table describes the labels in this screen.
Table 44
RIP
LABEL
DESCRIPTION
#
This is the index of the interface in which the RIP setting is used.
Interface
This is the name of the interface in which the RIP setting is used.
Version
The RIP version controls the format and the broadcasting method of the RIP
packets that the VMG sends (it recognizes both formats when receiving). RIP
version 1 is universally supported but RIP version 2 carries more information. RIP
version 1 is probably adequate for most networks, unless you have an unusual
network topology.
packets that the VMG sends (it recognizes both formats when receiving). RIP
version 1 is universally supported but RIP version 2 carries more information. RIP
version 1 is probably adequate for most networks, unless you have an unusual
network topology.
Operation
Select Passive to have the VMG update the routing table based on the RIP
packets received from neighbors but not advertise its route information to other
routers in this interface.
packets received from neighbors but not advertise its route information to other
routers in this interface.
Select Active to have the VMG advertise its route information and also listen for
routing updates from neighboring routers.
routing updates from neighboring routers.
Enabled
Select the check box to activate the settings.
Apply
Click Apply to save your changes back to the VMG.