Справочник Пользователя для ZyXEL Communications VMG5313-B10A/ VMG5313-B30A
Chapter 6 Broadband
VMG5313-B10A/-B30A Series User’s Guide
99
6.5.1 Modify 802.1X Settings
Use this screen to edit 802.1X authentication settings. Click the Edit icon next to the rule you want
to edit. The screen shown next appears.
to edit. The screen shown next appears.
Figure 25
Network Setting > Broadband > 802.1x > Modify
The following table describes the labels in this screen.
6.6 Ethernet WAN
Use the Ethernet WAN screen to convert LAN port number four as a WAN port and to restore it
back from a WAN to a LAN port for Ethernet Internet access.
back from a WAN to a LAN port for Ethernet Internet access.
Table 14
Network Setting > Broadband > 802.1x: Edit
LABEL
DESCRIPTION
Active
This field allows you to activate/deactivate the authentication.
Select this to enable the authentication. Clear this to disable this authentication without
having to delete the entry.
having to delete the entry.
Interface
Select an interface to which the authentication applies.
EAP Identity
Enter the EAP identity of the authentication.
EAP method
This is the EAP method used for this authentication.
Enable
Bidirectional
Authentication
Bidirectional
Authentication
Select this to allow bidirectional authentication.
Certificate
Select the certificate you want to assign to the authentication. You need to import the
certificate in the Security > Certificates > Local Certificates screen.
certificate in the Security > Certificates > Local Certificates screen.
Trusted CA
Select the Trusted CA you want to assign to the authentication. You need to import the
certificate in the Security > Certificates > Trusted CA screen.
certificate in the Security > Certificates > Trusted CA screen.
Apply
Click Apply to save your changes.
Cancel
Click Cancel to exit this screen without saving.