Справочник Пользователя для Maxtor WDR-516S

WDR-516S Installation Guide

Rev 1.0(93/11)

<Note>

The dip switch should be set at ‘MASTER’ position for the first installed or built-in HDD.

Additional HDD should be set as ‘SLAVE.’ Identical dip switch setting may cause system conflict

or mal-function.

(3) Remove the 6 screws as illustrated below and pull up the cover from the rear part to open

(4) Take out power and data cable of HDD from Main PCB ASS’Y. Remove 4 HDD Bracket screws and

take out HDD ASS’Y.

MAIN PCB

ASS’Y

HDD POWER
CABLE

SCREW
4EA

HDD CABLE

SCREW

6EA

TOP

COVER