Справочник Пользователя для 3D Connexion 466-1513-01

Exception Opening Reports report the arming level as 111 (1—OFF) and the user that disarmed 
the system.

Exception Closing Reports report the arming level as 222 (2—STAY) or 333 (3—AWAY), and 
the user that armed to that level. See “Notification By Pager”.

The most typical setup of this feature makes use of both Exception Opening and Exception Clos-
ing. (It is possible to use only Exception Opening or only Exception Closing, however.)

Follow these steps to define Opening and Closing schedules for Exception paging. If you need 
assistance setting up a time schedule that fits your needs, see “Creating Time Schedules”.

A Touchtone phone can be used to set up Notify by Exception, but touchpads work much better 
because of their extensive feedback. See “Appendix C” for touchpad and phone programming 
instructions.

1. At an alphanumeric or fixed display touchpad, enter the programming menus by pressing 

9

 + 

System or Partition Master 

CODE

.

2. Press 

0620

 + 

#

.

3. To schedule:

Exception Opening, press 

#

 when the touchpad displays “EXCEPTION OPENING” or 

“ECEPT OPEN,” then press 

#

.

Exception Closing, press 

B

 until the touchpad displays “EXCEPTION CLOSING” or 

“ECEPT CLOSE,” then press 

#

.

4. The touchpad displays the first available time schedule.

5. Enter

2

 + 

#

 to assign the time schedule to the event.

1

 + 

#

 to make the time schedule inactive for the event.

6. Press 

#

 to secure your choice.

7. Press 

B

 to go to the next schedule and repeat step 5.

8. When you’ve finished attaching the desired time schedules, press 

*

 

+

 

00

 

+

 

#

to exit the pro-

gramming menus.

The system can monitor the activity in your home and automatically call for help if normal activ-
ities are not detected within a defined period of time.

For example, if someone falls and can’t move, the system will detect that normal activities, such 
as placing outgoing calls or opening doors and windows, have not occurred for a predetermined 
No Activity time.

The system sounds a low-volume auxiliary alarm to let you know there may be a problem. If all 
is well, you can stop the siren by disarming your system. If no one disarms the system for 5 min-
utes, your system calls the central monitoring station. The central monitoring station will respond 
in accordance to the guidelines set forth in your monitoring agreement.

Refer to “Appendix A: User Sheets” to see if the No Activity feature is currently available to you 
and the duration of the No Activity setting. If the feature is not currently available to you and you 
wish to have it, contact your installer.

To download to the panel is to replace the old information in it with new information. Download-
ing is performed only by your dealer using software specifically designed for this panel.

Turning the Download feature on allows the dealer remote access to your panel in order to:

•

Update your account.

•

Back up data from your panel.

•

Allow your dealer to quickly implement requested programming changes.