Справочник Пользователя для Nilfisk-Advance America IVT 1000 CR H
35
Use only as described in this manual. Use only
Manufactureʼs recommended accessories and spare
parts.
Do not use with damaged cord or plug. If the appliance
is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water, return
it to a service center.
Do not pull or carry by cord, use cord as handle, close
a door on cord, or pull cord around sharp edges or
corners. Do not run appliance over cord. Keep cord
away from heated surfaces.
Regularly examine the supply cord for damage, such as
cracking or ageing. If damage is found, replace the cord
before further use. Only replace the supply cord with
the type specified under “rec. spares” in the instruction
manual.
Do not unplug by pulling on cord. To unplug, grasp the
plug, not the cord.
Do not handle plug or appliance with wet hands.
Do not put any objects into openings. Do not use with
any opening blocked; keep free of dust, lint, hair, and
anything that may reduce airflow.
Keep hair, loose clothing, fingers, and all parts of the
body away from openings and moving parts.
Under no circumstances should the machine be used
for picking up hot material. In particular the machine
must not be used for cleaning open and closed
fireplaces, ovens or similar that contain warm or
gloving ashes.
Do not use without dust bag and/or filters in place.
Turn off all controls before unplugging.
Use extra care when cleaning on stairs.
The machine must not be used for picking up
combustible or explosive materials, nor should it be
used in an explosive atmosphere.
2.3 Grounding instructions
This appliance must be grounded. If it should
malfunction or break down, grounding provides a
path of least resistance for electric current to reduce
the risk of electric shock. The plug must be inserted
into an appropriate socket that is properly installed
and grounded in accordance with all local codes and
ordinances.
WARNING – improper connection of the equipment
grounding conductor can result in a risk of electrical
shock.
Check with a qualified electrician or service person if
you are in doubt as to whether the outlet is properly
grounded. Do not modify the plug supplied with the
appliance – if it will not fit the socket, have a proper
one installed by a qualified electrician.
Attention!!
Under no circumstances must the user tamper with the
equipment.
All attempts by the user or by unauthorised personnel
to dismantle, modify or, more generally, tamper with
any part of the vacuum shall void the guarantee.
Contact your nearest
After-Sales Service Centre in the event of faults.
3 - Machine data
3.1 Identification data.
Always state all the identification data on the machine
when ever you contact Nilfisk-Advance after sales
service.
Exact identification of the machine model and serial
number will help prevent incorrect information from
being given.
The identification plate with the machine data is shown
in fig. 1
A Type
B Electrical Power
C Serial number - yywwXXXX
(yy=year ww = week XXXX = number
D Operating Frequency
E Dust class Category
F Ref. number
G Voltage
H Max. Current
3.2 - Main parts (fig. 2 / 3 / 4)
The following list of main parts will help users to
understand
the terms used in this manual.
Fig 2 standard machine
1. Motor head incl. handle
2. On / Off button
3. Exhaust filter cover
4. ULPA U 15 exhaust filter
5. Top container
6. Main filter “M” class Goretex® PTFE filter
7. Dust container
8. Stainless steel clamps
9. Trolley
Fig. 3 “H” class machine
1. Motor head incl. handle
2. On / Off button
3. Exhaust filter cover
4. ULPA U 15 exhaust filter
5. Top container
6. Vacuum Gauge / Manometer
8. “H” class HEPA H 13 filter
9. Dust container
10. Blind cover for inlet
11. Stainless steel clamps
12. Stainless steel clamps
Fig. 4 “Safe Pack” machine
1. Motor head incl. handle
2. On / Off button
3. Exhaust filter cover
4. ULPA U 15 exhaust filter
5. Top container
7. “Safe pack” unit
8. HEPA H 13 filter fixed inside safe pack unit
9. Stainless steel clamps
10. Trolley
4 - Safety
Attention!!
Check that all clamps are correctly positioned and
working correctly before starting and using the
machine.
Never tamper with the safety devices.
Always check that the protection and safety devices are
mounted and working at the beginning of each work
shift or before using the machine. If this is not the case,
switch off the vacuum and report fault.