Справочник Пользователя для Mitsubishi Electronics EW230U-ST

EN-44

Reminds the presenter to finish the presentation within a certain time 

frame. See 

 for details.

Sets the language for the On-Screen Display (OSD) menus. See 

 for details.

See 

 for details.

Allows the projector to turn off automatically if no input signal is 

detected after a set period of time. See 

 for details.

Sets the image blank time when the Blank feature is activated, once 

elapsed the image will return to the screen. See 

 for details.

Disables or enables all panel key functions except 

POWER on the 

projector and keys on the remote control. See 

 for details.

Sets the auto-shutdown timer. The timer can be set to a value between 

30 minutes and 12 hours.

Allows you to select which logo screen will be displayed during 

projector start-up. Three options are available: MITSUBISHI logo, 

Black screen, or Blue screen.

Selecting On enables the function and the projector cooling time will be 

shortened to a few seconds.

See 

 for details.

Menu display time
Sets the length of time the OSD will remain active after your last key 

press. The range is from 5 to 30 seconds in 5-second increments.

Menu position
Sets the On-Screen Display (OSD) menu position.

Selecting On enables the function. The projector can output a VGA 

signal when it is in standby mode and the COMPUTER-1 and 

MONITOR OUT jacks are correctly connected to devices. See 

 for how to make the 

connection.

Lamp mode
See 

 for details.

Reset lamp timer
See 

Equivalent lamp hour
See 

 for details on how 

the total lamp hour is calculated.