Справочник Пользователя для Mitsubishi Electronics AD75P1/P2/P3

 
 

 

11 - 22                                                                                                                                                       11 - 22 

MELSOFT

11. POSITIONING DEBUGGING 

 

 

 

 

 

Item Description 

"Data set" button 

Click this button to display the Sampling monitor set dialog box. 

Sampling monitor 

For signals, their ON/OFF states are indicated by HIGH/LOW. 
For buffer memory, the addresses and waveform data are displayed. 
Waveforms are magnified or reduced according to the main screen size. 
The sampling result display changes in 500ms increments and its cycle ends in 2 minutes. 

Signal 

Choose the types of the sampling-monitored signals from the X device, Y device, external I/O 
signal, status signal and servo status signal. 

Status 

Choose the sampling-monitored signals from the selected signal types. 

Buffer memory 

Set the AD75 buffer memory addresses and sizes (device sizes) to be sampling monitored. 
The setting range is buffer memory address No.s 1 to 1099. 

Upper Limit 
Lower Limit 

Set the upper and lower limit values of the sampling result display. 

"OK" button 

Click this button to close the Sampling monitor set dialog box and display the settings on the 
sampling monitor main screen.