Справочник Пользователя для Q-Logic 2400
6–iSCSI Noninteractive Commands
-ps
SN0054667-00 C
6-21
-ps
To view persistent targets for the adapter port, issue the -ps command as follows:
-ps <hba_port_inst> [Target ID]
If you do not specify the [Target ID], QConvergeConsole CLI lists all targets
for the specified adapter port number. If you do not specify the port instance
[hba_port_inst]
[hba_port_inst]
or the target ID, [Target ID],
QConvergeConsole CLI lists
all target IDs for all adapter ports in the system.
-pu
To unbind a persistent target, issue the -pu command as follows:
-pu <hba_port_inst> <Target ID>
-px
To unbind all persistent targets on the adapter, issue the -px command as
follows:
-px <hba_port_inst>
-r
(Update ROM Image)
Be sure to select Save changes and reset HBA afterwards; otherwise, the
changes do not take effect.
changes do not take effect.
Type the following command to update the specified adapter’s ROM:
-r <hba_port_inst> <file_name>
The <hba_port_inst> parameter is the adapter instance to update. The
<file_name> parameter indicates the file containing the ROM image to upload.
<file_name> parameter indicates the file containing the ROM image to upload.
CAUTION!
Before attempting to update the ROM image, contact QLogic Customer
Support.
Support.
Before updating the ROM image, ensure that no I/O processes are
running.
running.
An administrator must take necessary actions to ensure changes are
fully recognized by the operating system (reboot, flush cache, sync disk,
and so forth).
fully recognized by the operating system (reboot, flush cache, sync disk,
and so forth).
A ROM update and reset are performed that requires that all applications
accessing impacted LUNs must be shut down.
accessing impacted LUNs must be shut down.
Any impacted systems must be unmounted.