Справочник Пользователя для Mitsubishi Electronics QD75D1N
9 - 2
MELSEC-Q
9 MAJOR POSITIONING CONTROL
9.1 Outline of major positioning controls
"Major positioning controls" are carried out using the "positioning data" stored in the
QD75.
The basic controls such as position control and speed control are executed by setting
the required items in this "positioning data", and then starting that positioning data.
The control system for the "major positioning controls" is set in setting item
" Da.2 Control system" of the positioning data.
Control defined as a "major positioning control" carries out the following types of
control according to the " Da.2 Control system" setting.
QD75.
The basic controls such as position control and speed control are executed by setting
the required items in this "positioning data", and then starting that positioning data.
The control system for the "major positioning controls" is set in setting item
" Da.2 Control system" of the positioning data.
Control defined as a "major positioning control" carries out the following types of
control according to the " Da.2 Control system" setting.
Major positioning control
Details
Da.2 Control system
Position contro
l
Linear control
1-axis linear
control
control
ABS Linear 1
INC Linear 1
INC Linear 1
Positioning of a designated 1 axis is carried out from the
start address (current stop position) to the designated
position.
start address (current stop position) to the designated
position.
2-axis linear
interpolation
control
interpolation
control
ABS Linear 2
INC Linear 2
INC Linear 2
Using a designated 2 axes, linear interpolation control is
carried out from the start address (current stop position) to
the designated position.
carried out from the start address (current stop position) to
the designated position.
3-axis linear
interpolation
control
interpolation
control
ABS Linear 3
INC Linear 3
INC Linear 3
Using a designated 3 axes, linear interpolation control is
carried out from the start address (current stop position) to
the designated position.
carried out from the start address (current stop position) to
the designated position.
4-axis linear
interpolation
control
interpolation
control
ABS Linear 4
INC Linear 4
INC Linear 4
Using a designated 4 axes, linear interpolation control is
carried out from the start address (current stop position) to
the designated position.
carried out from the start address (current stop position) to
the designated position.
Fixed-feed
control
control
1-axis fixed-
feed control
feed control
Fixed-feed 1
Positioning of a designated 1 axis is carried out from the
start address (current stop position).
(The " Md.20 Current feed value" is set to "0" at the
start.)
start address (current stop position).
(The " Md.20 Current feed value" is set to "0" at the
start.)
2-axis fixed-
feed control
feed control
Fixed-feed 2
Using a designated 2 axes, linear interpolation control is
carried out from the start address (current stop position).
(The " Md.20 Current feed value" is set to "0" at the
start.)
carried out from the start address (current stop position).
(The " Md.20 Current feed value" is set to "0" at the
start.)
3-axis fixed-
feed control
feed control
Fixed-feed 3
Using a designated 3 axes, linear interpolation control is
carried out from the start address (current stop position).
(The " Md.20 Current feed value" is set to "0" at the
start.)
carried out from the start address (current stop position).
(The " Md.20 Current feed value" is set to "0" at the
start.)
4-axis fixed-
feed control
feed control
Fixed-feed 4
Using a designated 4 axes, linear interpolation control is
carried out from the start address (current stop position).
(The " Md.20 Current feed value" is set to "0" at the
start.)
carried out from the start address (current stop position).
(The " Md.20 Current feed value" is set to "0" at the
start.)
2-axis circular
interpolation
control
interpolation
control
Sub point
designation
designation
ABS Circular sub
INC Circular sub
INC Circular sub
Positioning is carried out in an arc path to a position
designated from the start point address (current stop
position), using the designated 2 axes.
designated from the start point address (current stop
position), using the designated 2 axes.
Center point
designation
designation
ABS Circular right
ABS Circular left
INC Circular right
INC Circular left
ABS Circular left
INC Circular right
INC Circular left
Speed control
1-axis speed
control
control
Forward run speed 1
Reverse run speed 1
Reverse run speed 1
The speed control of the designated 1 axis is carried out.
2-axis speed
control
control
Forward run speed 2
Reverse run speed 2
Reverse run speed 2
The speed control of the designated 2 axes is carried out.
3-axis speed
control
control
Forward run speed 3
Reverse run speed 3
Reverse run speed 3
The speed control of the designated 3 axes is carried out.
4-axis speed
control
control
Forward run speed 4
Reverse run speed 4
Reverse run speed 4
The speed control of the 4 axes is carried out.