Справочник Пользователя для Mitsubishi Electronics FX2NC
FX Series Programmable Controlers
Applied Instructions 5
5-146
5.16
Inline Comparisons - FNC 220 to FNC 249
Contents:
Page
LD
-
LoaD compare
FNC 224 to 230
5-119
AND
-
AND compare
FNC 232 to 238
5-120
OR
-
OR compare
FNC 240 to 246
5-120
Symbols list:
D - Destination device.
S - Source device.
m, n- Number of active devices, bits or an operational constant.
Additional numeric suffixes will be attached if there are more than one operand with the same
function e.g. D
S - Source device.
m, n- Number of active devices, bits or an operational constant.
Additional numeric suffixes will be attached if there are more than one operand with the same
function e.g. D
1
, S
3
or for lists/tabled devices D
3+0,
S
+9
etc.
MSB - Most Significant Bit, sometimes used to indicate the mathematical sign of a number, i.e.
positive = 0, and negative = 1.
LSB - Least Significant Bit.
positive = 0, and negative = 1.
LSB - Least Significant Bit.
Instruction modifications:
-
An instruction operating in 16 bit mode, where
identifies the instruction
mnemonic.
P - A 16 bit mode instruction modified to use pulse (single) operation.
D
- An instruction modified to operate in 32 bit operation.
D
- A 32 bit mode instruction modified to use pulse (single) operation.
- A repetitive instruction which will change the destination value on every scan unless
modified by the pulse function.
- An operand which cannot be indexed, i.e. The addition of V or Z is either invalid or will
have no effect to the value of the operand.