Справочник Пользователя для Garmin Ghc 10
GHC 10 Quick Start Manual
1
Configuring a GHC 10 Remote
Control
To configure an optional remote control
on the GHC 10, from the Heading
screen, select
Menu
>
Setup
>
Remote
.
You can connect one optional GHC 10
remote control to a GHC 10.
Search for Remote—allow the GHC 10
Search for Remote—allow the GHC 10
to search for an optional GHC 10 remote
control.
Disconnect Remote—(only available
Disconnect Remote—(only available
when a remote control is connected)
disconnect a connected remote control.
Button (1–3) Action—define the
Button (1–3) Action—define the
functions of the three dynamic buttons
on a connected remote control. Choose
from the options listed in the Remote
Button Action Table.
Button Function
Page Reference
Zigzag
Circles
U-Turn
Route To
Orbit
Cloverleaf
Search
Transmission
Direction
Remote Button Action Table
Notes:
If you assign
Transmission
Direction
to a button on the
remote control, the autopilot must
be in standby mode to change the
direction (forward or reverse).
If you assign a pattern to a button
If you assign a pattern to a button
on the remote control, remember
that you are responsible for the
safe operation of your boat. Do
not begin a pattern until you are
certain that the water is clear of
obstacles.
•
•