Справочник Пользователя для Mitsubishi Electronics FR-D720-008

4.24 Initial value change list

Displays and sets the parameters changed from the initial value. 

Operation Display 

1.

Screen at powering on

The monitor display appears.

2.

Press 

to choose the PU operation mode.

PU indication is lit.

3.

Press 

 to choose the parameter setting 

mode.

PRM indication is lit.

(The parameter number read previously 
appears.)

4.

Turn 

 until 

 appears.

5.

Pressing 

 changes to the initial value 

change list screen.

* It may take several seconds

for creating the initial value

change list. 

"

"

flickers while creating the list.

6.

Turning 

 displays the parameter number 

changed.

Press 

 to read the present set value.

Turn 

 and press 

 to change the 

setting 
(refer to step 6 and 7 on page 55)

Flicker   Parameter setting complete!!

Turn 

 to read another parameter.

The display returns to 

 after all 

parameters are displayed.

7.

Pressing 

 in 

 status returns to 

the parameter setting mode.

 Turning 

 sets other parameters.

 Pressing 

 displays the change list again.

NOTE

Calibration parameters (C1 (Pr. 901) to C7 (Pr. 905)) are not displayed even they are changed from the initial settings.
Only simple mode parameter is displayed when simple mode is set (Pr. 160 = "9999" (initial value)) 
Pr. 160  is displayed independently of whether the setting value is changed or not. 
When parameter setting is changed after creating the initial value change list, the setting will be reflected to the initial
value change list next time.

Parameters referred to