Справочник Пользователя для Yamaha VX Cruiser

39

EJU31458

The multifunction information center displays
various watercraft information.

Multifunction information center initial op-
eration
When the multifunction information center is
activated, all of the display segments come
on. After 2 seconds, the warning indicators in
the information display go off, and then the
center starts to operate normally.
If only the multifunction information center is
activated, the “WARNING” indicator light
blinks once.

VX Deluxe / VX Cruiser: The “SECURITY” in-
dicator light also comes on as part of the initial
operation.
The  “SECURITY” indicator light will go off
when the engine is started.
Multifunction information center standby 
state
If the multifunction information center does
not receive any operation input within 25 sec-

onds after the engine stops, the center will
turn off and enter a standby state. When the
engine is started again, the displays return to
their state before the center turned off, and
then the center starts to operate normally.

EJU35024

The information display shows watercraft op-
erating conditions.

EJU31503

Speedometer 
The speedometer shows the watercraft speed
against water.
By switching the display units, the speed can
be shown in kilometers per hour “km/h” or
miles per hour “mph”.

1 “SECURITY” indicator light (VX Deluxe / 

VX Cruiser)

2 Select button
3 Information display

4 “L-MODE” indicator light (VX Deluxe / 

VX Cruiser)

5 “WARNING” indicator light

1 Tachometer
2 Speedometer

3 Hour meter/voltmeter

4 Fuel level meter
5 Check engine warning indicator

6 Engine overheat warning indicator

7 Oil pressure warning indicator
8 Fuel level warning indicator

UF2N10E0.book  Page 39  Tuesday, October 6, 2009  5:02 PM