Справочник Пользователя для Furuno 711c

7.  INITIAL SETTINGS

3. If you selected [Function Key], do the following to select a function. If not, go to 

step 4.
1) Rotate 

the 

Course control knob to select the current setting for [Function 

Key] then push the knob.

For Fantum Feedback

TM

, only [Turn of 180°] is selective.

2) Rotate 

the 

Course control knob to select a turn then push the knob.

3) Rotate 

the 

Course control knob to select the current setting for [PORT/ST-

BD] then push the knob.

4) Rotate 

the 

Course control knob to select the direction of the turn then push 

the knob.

4. If you have another device connected to the UNIVERSAL IN port, set it up at [In 

Port 2].

1. Rotate the Course control knob to select the current setting for [Out Port1] then 

push the knob.

2. Rotate the Course control knob to select the action that triggers an external 

buzzer or lamp then push the knob.
A lamp lights or an external buzzer sounds when;
•  [EXT Buzzer]: The [Buzzer] setting on the [Alarm] menu is automatically set to 

[Internal+External].

•  [STBY Mode]: The NAVpilot goes into the STBY mode.
•  [AUTO Mode]: The NAVpilot goes into the AUTO mode.
•  [NAV Mode]: The NAVpilot goes into the NAV mode.
•  [AUTO/NAV Mode]: The NAVpilot switches between the AUTO and NAV 

modes and vice versa.

•  [AP Control]: The rudder is moved.

•  [PORT Arrow Key]: The PORT arrow key (

) is operated.

•  [STBD Arrow Key]: The STBD arrow key (

) is operated.

• [Disabled]: Function disabled.

3. If you have another device connected to the UNIVERSAL OUT port, set it up at 

[Out Port2].

Turn of 180

°

Circle

Orbit
Spiral
Square
Fig 8
Zigzag