Справочник Пользователя для Furuno 711c
2. STEERING MODES
2-9
2.4
Response Feature
The response feature provides for simple setting of the NAVpilot’s parameter to
counter the effects of wind, etc. Normally, use the auto response feature (see
section 2.4.1). If you feel that the auto response feature is not working properly, adjust
the response feature manually (see section 2.4.2). This feature is available in the fol-
lowing conditions:
counter the effects of wind, etc. Normally, use the auto response feature (see
section 2.4.1). If you feel that the auto response feature is not working properly, adjust
the response feature manually (see section 2.4.2). This feature is available in the fol-
lowing conditions:
• AUTO, NAV, WIND modes
• [Sea State] is set for [Full-Auto] or [Semi-Auto]. For the setting of [Sea State], see
• [Sea State] is set for [Full-Auto] or [Semi-Auto]. For the setting of [Sea State], see
2.4.1
How to activate the auto response feature
1. Push the Course control knob to show the [Response] window.
2. Press the
key to select [Auto].
3. Push the Course control knob to confirm your setting and close the window.
2.4.2
How to activate the manual response feature
1. Push the Course control knob to show the [Response] window.
2. Press the
key to select the current setting value.
3. Rotate the Course control knob to set response level (setting range: 1-9).
Raise the response level to get back on course when external interference (wind,
etc.) is pushing the boat off course.
etc.) is pushing the boat off course.
4. Push the Course control knob to close the window.
Response
Auto
Push ENTER knob
To return
To return
3
Response
Auto
3
Turn the knob
to change value.
to change value.