Справочник Пользователя для Lucent Technologies 6.1
MERLIN LEGENDCommunications System Release 6.1
System Planning
System Planning
555-661-112
Issue 1
August 1998
Lines/Trunks
Page 3-62
Assigning Telephone Buttons
3
Direct-Line Consoles
3
Use these instructions only if the system has one or more DLCs. Otherwise,
proceed to Chapter 4, “Features,” to record feature assignments on the forms for
each extension.
proceed to Chapter 4, “Features,” to record feature assignments on the forms for
each extension.
NOTE:
NOTE:
NOTE:
For more information on DLCs, see the
Feature Reference.
The number of line, Direct Station Selector (DSS), and programmed feature
buttons assigned to a DLC depends on the type of telephone and the number of
lines/trunks connected to the system. The factory setting for DLCs is that, in
addition to an SA Voice and an SA Ring button, or ICOM buttons, as many
lines/trunks as possible are assigned to each console. Each line/trunk appears on
a separate button, which means that the number of lines/trunks assigned is limited
to the number of buttons on the console (up to a maximum of 32 buttons on the
34-button analog DLC).
buttons assigned to a DLC depends on the type of telephone and the number of
lines/trunks connected to the system. The factory setting for DLCs is that, in
addition to an SA Voice and an SA Ring button, or ICOM buttons, as many
lines/trunks as possible are assigned to each console. Each line/trunk appears on
a separate button, which means that the number of lines/trunks assigned is limited
to the number of buttons on the console (up to a maximum of 32 buttons on the
34-button analog DLC).
If a DSS is present, the system assigns a DSS button for each extension number
associated with an extension and special-feature buttons that are used by the
DLC operator for call-handling functions.
associated with an extension and special-feature buttons that are used by the
DLC operator for call-handling functions.
Figure 3–6
show initial line/trunk and feature assignments for MLX
and analog DLC consoles. Refer to the appropriate figure as you select line/trunk
assignments for DLCs.
assignments for DLCs.
NOTE:
NOTE:
NOTE:
System Access buttons appear on DLCs in Hybrid/PBX mode. Intercom
buttons appear on DLCs in Key or Behind Switch mode.
buttons appear on DLCs in Key or Behind Switch mode.
Figure 3–6.
MLX Direct-Line Console
22
21
5
4
3
2
1
24
23
10
9
8
7
6
SA Icom
Voice
Voice
Ring
24
23
15
14
13
12
11
28
27
20
19
18
17
16
20
28
SA Icom
1
2
3
6
7
8
4
5
11
12
13
16
17
18
14
15
9
10