Справочник Пользователя для Lucent Technologies 6.1
MERLIN LEGENDCommunications System Release 6.1
System Planning
System Planning
555-661-112
Issue 1
August 1998
Data Communications
Page 5-30
Assigning Lines/Trunks to Data and Video Stations
5
The system treats each data station, except for analog voice and modem data
stations, as an extension with a 34-button telephone.
stations, as an extension with a 34-button telephone.
When you choose the mode of operation (Key, Behind Switch, or Hybrid/PBX),
Intercom (ICOM) or System Access (SA) buttons are assigned automatically to
every extension connected to the control unit. However, you can customize the
system by changing the factory-set assignments and reassigning line buttons.
The number and types of buttons assigned depends on the mode chosen and the
type of extension jack you are using.
Intercom (ICOM) or System Access (SA) buttons are assigned automatically to
every extension connected to the control unit. However, you can customize the
system by changing the factory-set assignments and reassigning line buttons.
The number and types of buttons assigned depends on the mode chosen and the
type of extension jack you are using.
NOTE:
NOTE:
NOTE:
Trunks cannot be independently assigned to analog voice and modem data
stations. The line/trunk assignment for the telephone also includes the
modem extension; therefore, these instructions are not used for these types
of data stations.
stations. The line/trunk assignment for the telephone also includes the
modem extension; therefore, these instructions are not used for these types
of data stations.
Forms Needed
5
■
■
■
■
Planning Form Instructions
5
You should have already filled out preliminary information on Forms 4e and 5c
when you planned voice communications. The lines/trunks for MLX telephones
have already been assigned.
when you planned voice communications. The lines/trunks for MLX telephones
have already been assigned.
There are two different forms for data stations:
■
Data Form 1a. Use this form for modem data-only stations and for modems
used to communicate with the local host computer and to communicate
with a workstation on a LAN.
used to communicate with the local host computer and to communicate
with a workstation on a LAN.
■
Data Form 1b. Use this form for ISDN terminal adapters and ISDN terminal
adapter data stations used to communicate with the local host computer or
with a workstation on a LAN.
adapter data stations used to communicate with the local host computer or
with a workstation on a LAN.
Make enough copies of each data form so that you can complete one form for
each data station. Complete each form:
each data station. Complete each form:
1.
From Form 2a, System Numbering: Extension Jacks, obtain the
identification information for each data station.
identification information for each data station.