Справочник Пользователя для ICOM IC-A6
14
4
MEMORY OPERATION
■ Memory names
ï Programming memory names
The memory channel can display a 6-character names in-
stead of the programmed frequency.
stead of the programmed frequency.
q Rotate [DIAL] to select the desired frequency in the fre-
quency mode.
w Push
, then push [MR•
MW
] to program the contents
into the selected memory channel.
e Rotate [DIAL] to select the desired memory channel to be
programmed.
• Push [0•
BANK
] to select the BANK number if desired. Push
[CLR•
DEL
] to exit the BANK selection mode.
r Push [MR•
MW
] to enter the memory name programming
mode.
• “-- -- -- -- -- -- ” appears on the display.
t Push the appropriate digit key several times to select the
desired character as listed at right.
• To erase a character, overwrite with a space (displayed as _).
• To move the cursor forwards or backwards, use [DIAL].
• To move the cursor forwards or backwards, use [DIAL].
y Push [ENT•
WX
] to program the name.
• Flashing the memory name stops.
• When no name is programmed, the display shows the operating
• When no name is programmed, the display shows the operating
frequency.
• To clear the programmed memory names, push [CLR•
DEL
] be-
fore pushing [ENT•
WX
].
■ Clearing the memory contents
Unwanted memory channels can be cleared. Programming
over a memory channel also clears the previously pro-
grammed contents. Memory channel 1 cannot be cleared.
over a memory channel also clears the previously pro-
grammed contents. Memory channel 1 cannot be cleared.
q Select the memory channel to be cleared.
w Push
w Push
, then push and hold [CLR•
DEL
] for 1 sec.
• “-- -- -- -- -- --” appears momentarily, then the next selec-
table channel appears.
Key
Character
Key
Character Key
Character
1
1, Q, Z
2
2, A, B, C
3
3, D, E, F
4
4, G, H, I
5
5, J, K, L
6
6, M, N, O
7
7, P, R, S
8
8, T, U, V
9
9, W, X, Y
ENT
Program
0
0, space, -
4