Справочник Пользователя для ICOM IC-A6

29

9

If your transceiver seems to be malfunctioning, please check
the following points before sending it to a service center.

No power comes on.

• The battery is exhausted.

• Recharge the battery pack.

pgs. 7,

• Bad connection for the battery pack.

• Check the connection to the transceiver.

25–27

No sound comes from

• Squelch level is too deep.

• Set squelch to the threshold point.

pgs. 8, 9

the speaker.

• Volume level is too low.

• Set [VOL] to a suitable level.

Transmitting impossible. • Some channels are receive only.

• Change channels.

p. 8

• The battery is exhausted.

• Recharge the battery pack.

p. 25–27

The display channel 

• Lock function is activated.

• Push 

, then push [7•

].

p. 11

can not be selected.

Scan does not start.

• All memory channels are not programmed • Set the “TAG” settings of desired

p. 17

programmed as “TAG” channels.

channels.

No beep sounds.

• Beep tones turned OFF.

• Push 

, then push [8•

BEEP

] to adjust 

p. 11

the beep tone level