Справочник Пользователя для Pelco C528M-E
8
C528M-E (4/03)
OPERATION
To operate the MPTAZ Series Control, use the push buttons to control the lens, and move the joystick to control the pan/tilt or
scanner.
scanner.
The MPTAZ Series Control has two modes of automatic pan/tilt operation: random scan and auto scan.
Random activation causes scanning between the limit stops in an unpredictable pattern.
To activate random mode, press the SELECT switch until the LED next to RANDOM is lit.
To activate random mode, press the SELECT switch until the LED next to RANDOM is lit.
Auto scan will operate the pan/tilt between limits for 30 minutes. After 30 minutes, the control returns to the random scan
mode. To activate auto scan, press the SELECT switch until the LED next to AUTO is lit.
mode. To activate auto scan, press the SELECT switch until the LED next to AUTO is lit.
To return to manual mode, move the joystick to the left or right. The control will also return to manual operation if power is lost
and restored.
and restored.