Инструкции Пользователя для Frigidaire A01060901

7

Leveling Door with Adjustable Hinge
Use the lower hinge adjustment to fine tune the 

door height and for final cabinet spacing. Use a 

7/16” socket or wrench to adjust the screw at the 

bottom of the lower hinge.
Adjusting Doors for Matching Tall 

Refrigerator/Freezer Pair
The doors may also be adjusted side to side with 

the slotted hinge for aligning the doors parallel 

to each other. Loosen the two bolts with a 3/8” 

wrench and one screw with a Phillips screwdriver. 

Shift the doors until parallel, then retighten the 

screw and bolts securely. (See illustration below.)
Lower Hinge Adjustment for Leveling the 

Freezer Pair
To level the doors using the adjustable lower 

hinge (some models):

1. If the refrigerator door is lower than the 

freezer door, raise the refrigerator door by 

turning the adjustment screw clockwise 

using a 7/16” socket wrench. (See 

illustration below.)

2. If the freezer door is lower than the 

refrigerator door, raise the freezer door by 

turning the adjustment screw clockwise 

using a 7/16” socket wrench. (See 

illustration below.)

Door

Raise

Door

Raise

Door

Slotted Hinge

Adjustment

⅜”

 bolts

Freezer

Refrigerator

Screw

Door

1. With the wire shelf installed, press the 

shelf grommet down onto the wire that is 

anchored into the freezer wall.  Be sure to 

keep the larger end of the shelf grommet 

away from the wall. 

2. Push the shelf grommet onto the wire until 

it snaps in place.

3. Slide the shelf grommet into the grommet 

already in the freezer wall until it is flush.