Справочник Пользователя для Frigidaire FPRH19D7LF

Скачать
Страница из 20
16
CARE AND CLEANING
Part
Cleaning Agents
Tips and Precautions
Interior & Door
Liners
• Soap and water
• Baking soda and 
water
•     Use 2 tablespoons of baking soda in 1 quart of 
warm water.
•     Be sure to wring excess water out of sponge or 
cloth before cleaning around controls, light bulb 
or any electrical part.
Door Gaskets
• Soap and water
•     Wipe gaskets with a clean soft cloth.
Drawers & Bins • Soap and water
•     Use a soft cloth to clean drawer runners and 
tracks.
•     Do not wash any removable items (bins, 
drawers, etc.) in dishwasher.
Glass Shelves
• Soap and water
• Glass cleaner
• Mild liquid sprays
•     Allow glass to warm to room temperature 
before immersing in warm water.
Exterior & 
Handles
• Soap and water
• Non Abrasive Glass
  Cleaner
•     Do not use commercial household cleaners, 
ammonia, or alcohol to clean handles.
•     Use a soft cloth to clean smooth handles.
•     Do not use a dry cloth to clean smooth doors.
Exterior & 
Handles
(Stainless Steel
Models Only)
• Soap and water
• Ammonia
• Stainless Steel
  Cleaners
•     Never use CHLORIDE to clean stainless steel.
•     Clean stainless steel front and handles with 
non-abrasive soapy water and a dishcloth. 
Rinse with clean water and a soft cloth.
•      Wipe stubborn spots with an ammonia-soaked 
paper towel, and rinse. Use a non-abrasive 
stainless steel cleaner. These cleaners can 
be purchased at most home improvement 
or major department stores. Always follow 
manufacturer’s instruction.
•     NOTE: Always, clean, wipe and dry with grain to 
prevent cross-grain scratching.
•     Wash the rest of the cabinet with warm water 
and mild liquid detergent. Rinse well, and wipe 
dry with a clean soft cloth.
CARE AND CLEANING CHART
•   Turning the refrigerator temperature control to “OFF” (See page 8) turns off the compressor, but does not 
disconnect electrical power to the lights or other electrical components.  Unplug the unit or switch the breaker 
that supplies power to the unit to the off position. 
•   Do not use razor blades or other sharp instruments which can scratch the appliance surface when removing 
adhesive labels. Any glue left from tape or labels can be removed with a mixture of warm water and mild 
detergent, or, touch the glue residue with the sticky side of tape you have already removed.  Do not remove the 
serial plate.
NOTE