Справочник Пользователя для Hitachi r-sf42bms
57
When this indicator lamp
(Lock on the panel for operation) is illuminated, any other button will not be actuated by pressing it.
This can prevent erroneous operation of the Control Panel or misuse by children.
■ When you want to stop the alarm
Push and hold the
“COOLING
MODE
”button for three
seconds with all the doors
closed until one beep sounds.
closed until one beep sounds.
When the setting has been
completed, the indicator
lamp is restored to the
original state.
completed, the indicator
lamp is restored to the
original state.
■ Locking
Push and hold the
“FREEZER”button
for approximately
three seconds until
one beep sounds.
three seconds until
one beep sounds.
is lit to indicate
that the lock has been
completed.
completed.
■ Unlocking
Push and hold the
“FREEZER”button
for approximately
three seconds until
two beeps sound.
three seconds until
two beeps sound.
is lit to indicate
that the lock has been
released.
released.
[“eco” OPERATION INDICATOR LAMP]/DOOR ALARM/LOCKING THE CONTROL PANEL
[“eco” Operation indicator lamp]
When the refrigerator is operated in a manner to reduce power consumption, such as Frost Recycle Cooling,
the indicator lamp is automatically lit to indicate that the refrigerator is operating in the energy saving mode.
the indicator lamp is automatically lit to indicate that the refrigerator is operating in the energy saving mode.
When a door remains open for 30 seconds or more, alarm sounds as shown below and characters on the Control Panel are blinking to indicate that the door is open with sound and light.
The Door Alarm can be stopped.
■ When you want to sound the alarm again
Push and hold the
“COOLING
MODE
”button for three
seconds with all the doors
closed until two beeps sound.
closed until two beeps sound.
When the setting has been
completed, the indicator
lamp is restored to the
original state.
completed, the indicator
lamp is restored to the
original state.
[
“eco” Operation indicator lamp]
[“eco” operation indicator lamp] can be turned off when you feel uneasy at night, etc.
■ How to turn off the
indicator lamp
Push and hold the
“COOLING
MODE
”button for three
seconds with all the doors
closed until the [“eco”
Operation indicator lamp] blinks.
closed until the [“eco”
Operation indicator lamp] blinks.
The [“eco” Operation
indicator lamp] is unlit.
indicator lamp] is unlit.
■ How to restore the setting
Push and hold the“COOLING MODE”
button for three seconds with all
the doors closed until the [“eco”
Operation indicator lamp] becomes lit.
the doors closed until the [“eco”
Operation indicator lamp] becomes lit.
The [“eco” Operation indicator lamp]
is lit for three seconds.
After that, the lamp is lit or unlit,
depending on the operation conditions.
is lit for three seconds.
After that, the lamp is lit or unlit,
depending on the operation conditions.
Push this button and hold it for 3 seconds
Push this button and hold it for 3 seconds
Push this button and hold it for 3 seconds
Push this button and hold it for 3 seconds
Push this button and hold it for 3 seconds
Push this button and hold it for 3 seconds
● If [“eco” Operation indicator lamp] isn’t illuminated, check the following things.
・ Is the [“eco” Operation indicator lamp] set as Off? → Perform the above-mentioned procedure for how to return.
・ Immediately after installation, when a lot of food is stored at a time, or when you open or close a door frequently, the
compressor operates at a high speed and this indicator lamp is not lit.
→ Open/close the door quickly or minimize
the number of opening/closing the door.
・ When the refrigerator is operated with “FREEZER”, “REFRIGERATOR” or “QUICK” enabled, → It will be illuminated after
the quick cooling functions fi nish and the operation of the refrigerator gets stable.
● When connecting/disconnecting the power plug or after recovering from electric power failure, it will return to the setting
where the [“eco” Operation indicator lamp] is illuminated.
● When the Door Alarm is disabled, characters on the Control Panel no longer blink and operation sound is no longer made, but alarm
indicating cleaning of the ice-making tray does sound.
● The Door Alarm is enabled when shipped.
● When connecting/disconnecting the power plug or after recovering from electric power failure, it will return to the setting where the
Door Alarm sounds.
※ From 30 seconds onwards, the Door Alarm sounds
only when the energy saving mode is set.
The Refrigerator Compartment, Ice Compartment,
Lower Freezer and Vegetable Compartment have the
Door Alarm function (, but the Upper Freezer doesn
Lower Freezer and Vegetable Compartment have the
Door Alarm function (, but the Upper Freezer doesn
’
t).
Notice
Notice
Door Alarm
Locking the Control Panel
Duration when door is open
1 minute
30 seconds※
2 minutes
Alarm sound
3 long beeps
3 long beeps
5 long beeps
3 long beeps
5 long beeps
Control Panel
Does not blink
Flashing
Flashing
Flashing
3 minutes
It keeps continuously sounding.
Flashing
1 beep
・・・
Long beep
2 beeps
Indicator
lamp is ON
Indicator
lamp is ON
About
3 seconds
About
3 seconds
● Always confi gure the settings with all the doors closed.
Pg.38
Caution
1 beep
・・・
Long beep
2 beeps
About
3 seconds
About
3 seconds
Indicator
lamp is ON
Indicator
lamp is OFF
Practical Advice on How to Use the Refrigerator / Replacement Parts / [
“eco
” Operation indicator lamp] / Door Alarm / Locking the control panel
” Operation indicator lamp] / Door Alarm / Locking the control panel
The indicator
lamp blinks
Indicator
lamp is ON
1 beep
1 beep
2 beeps
Long beep
About
3 seconds
About
3 seconds