Справочник Пользователя для Hotpoint RLS 175 x RLS 150 x RLFM 151 x RLFM 171 x

WARNING: To prevent the fridge from tilting forwards, it 
must be held in place with the stability bracket supplied.
This is the responsibility of the customer.

       

Fixed to the floor or wall at the rear of the fridge, the 
stability bracket hooks onto the compressor mounting 
plate holding the fridge secure.
The stability bracket must be installed securely in 
accordance with these instructions BEFORE using 
the fridge.

1. Position the fridge in its chosen location.
2. Looking from the front of the fridge, mark the position 

of the left hand panel.

3. Move the fridge far enough away to get clear access to 

the back wall.

4. In order to clear components on the compressor 

mounting plate, the stability bracket must be 
positioned on the floor between 100 - 200mm to the 
right of the left hand panel mark.

5. Mark and drill the fixing holes and insert suitable 

fixings to hold the bracket firm.

6. Carefully re-position the fridge. Make sure that the 

compressor mounting plate locates into the stability 
bracket.