Справочник Пользователя для Hamilton Beach 840067800

Machine will not work 
when switched “ON.”

Motor appears to stall 
when juicing.

Excess pulp building up 
in the Micro Mesh 
Filter Basket.

Pulp is too wet and 
insufficient juice is 
produced.

Juice leaks between the 
rim of the Juicer Cover 
and the Filter Bowl.

Juice sprays out of spout.

Juice drips out of spout 
immediately after juicing.

Machine vibrates 
excessively.

The Safety Locking Arm may not be correctly
engaged. Check to see if Safety Locking Arm
is properly positioned in the two grooves on
either side of the Juice Cover. Refer to pages 
5 and 6, Steps 4 and 5.

Wet pulp can build up under the Juicer Cover
if the juicing action is too vigorous. Try slower 
juicing action by pushing the Food Pusher
down more slowly. Refer to page 7, Step 4.

Turn OFF and unplug. Remove the Juicer
Cover, scrape off pulp. Reassemble and begin
juicing again. Try alternating vegetable and 
fruit varieties.

Try a slower juicing action. Turn OFF and
unplug. Remove Filter Basket and clean mesh
walls with a fine brush. This will remove excess
fiber build-up which could be inhibiting the
juice flow. Refer to pages 7 and 10.

Try a slower juicing action by pushing the 
Food Pusher down more slowly. Refer to 
page 7, Step 4.

Try a slower juicing action by pushing the 
Food Pusher down more slowly. Refer to 
page 7, Step 4.

With motor ON, raise and lower Food Pusher in
Feed Chute several times. The pressure forces
remaining pulp and juice out of Filter Bowl.

Build up of pulp in mesh of FIlter Basket. Turn
unit OFF and unplug. Clean Filter Basket. Refer
to page 10.