Справочник Пользователя для Electrolux EOG 10000
22 electrolux
Neutral wire
Live wire
Earth wire
(yellow-green)
at least 2 cm longer
Installation and connection
must be done in compliance
with the regulations in force.
Any interventions must be
carried out when the appliance
is switched off. Only
accredited engineers may work
on the appliance.
The manufacturer disclaims
any liability if the safety
measures are not observed.
must be done in compliance
with the regulations in force.
Any interventions must be
carried out when the appliance
is switched off. Only
accredited engineers may work
on the appliance.
The manufacturer disclaims
any liability if the safety
measures are not observed.
Connecting to the electrical supply
Before connecting to the electrical
supply, please make sure:
-
supply, please make sure:
-
The fuse and the domestic electrical
installation must be designed for the
max. load of the appliance (see rating
plate).
installation must be designed for the
max. load of the appliance (see rating
plate).
-
The domestic electrical installation
must be equipped with a proper earth
connection in accordance with the
regulations in force.
must be equipped with a proper earth
connection in accordance with the
regulations in force.
-
The socket or the multi-pole off switch
must be easy to access after the
appliance has been installed.
must be easy to access after the
appliance has been installed.
It is necessary that you install a double
pole switch between the oven and the
electricity supply (mains), with a
minimum gap of 3mm between the
switch contacts and of a type suitable
for the required load in compliance with
the current rules.
The switch must not break the yellow-
green earth wire at any point. The earth
wire should be 2 cm longer than the live
and neutral wires.
Important
After installation and connecting, the
cable must be placed so that it cannot
at any point reach a temperature of more
pole switch between the oven and the
electricity supply (mains), with a
minimum gap of 3mm between the
switch contacts and of a type suitable
for the required load in compliance with
the current rules.
The switch must not break the yellow-
green earth wire at any point. The earth
wire should be 2 cm longer than the live
and neutral wires.
Important
After installation and connecting, the
cable must be placed so that it cannot
at any point reach a temperature of more
Instructions for the Installer