Листовка для Moffat E21AC DD
4517 BS ACSeries specs V3 24/6/05 10:52 AM Page 14
Australia
Moffat Pty Limited
Moffat Pty Limited
Victoria/Tasmania
740 Springvale Road
Mulgrave, Victoria 3170
Telephone 03-9518 3888
Facsimile 03-9518 3833
vsales@moffat.com.au
740 Springvale Road
Mulgrave, Victoria 3170
Telephone 03-9518 3888
Facsimile 03-9518 3833
vsales@moffat.com.au
New South Wales
Telephone 02-8833 4111
nswsales@moffat.com.au
Telephone 02-8833 4111
nswsales@moffat.com.au
South Australia
Telephone 03-9518 3888
vsales@moffat.com.au
Telephone 03-9518 3888
vsales@moffat.com.au
Queensland
Telephone 07-3630 8600
qldsales@moffat.com.au
Telephone 07-3630 8600
qldsales@moffat.com.au
Western Australia
Telephone 08-9562 0263
jberent@moffat.com.au
Telephone 08-9562 0263
jberent@moffat.com.au
New Zealand
Moffat Limited
Moffat Limited
Christchurch
Telephone 03-389 1007
sales@moffat.co.nz
Telephone 03-389 1007
sales@moffat.co.nz
Auckland
Telephone 09-574 3150
sales@moffat.co.nz
Telephone 09-574 3150
sales@moffat.co.nz
Australia
www.moffat.com.au
New Zealand
www.moffat.co.nz
Printed in China
© Copyright Moffat Ltd
Moffat/4517-E21/BH/3.5M/6.05
© Copyright Moffat Ltd
Moffat/4517-E21/BH/3.5M/6.05
Dimensions
Width
950mm
Depth
825mm
Height
1950mm
Weight
310kg
Packed Dimensions
Width
1130mm
Depth
1050mm
Height
2220mm
Weight
400kg
Shelves
1/1 GN
20
Shelf Spacings
67mm
Installation requirements
(for precise installation
instructions, please refer to the
unit’s installation manual).
instructions, please refer to the
unit’s installation manual).
Power connection requirements
Multi pole circuit breaker and all
pole disconnection isolator switch
installed near the appliance.
pole disconnection isolator switch
installed near the appliance.
Supply line voltage;
400-415V ~ 50Hz, 3P+N+E
400-415V ~ 50Hz, 3P+N+E
Special voltage options available
on request.
on request.
Power Connection
Total (kW)
31.8
Convection power (kW)
30
Rated Current (A) (400V)
45
IPX5 spray-proof and hose proof.
Installation clearances
- rear
25mm
- right
500mm*
- left
50mm
*Clearance required on fixed
installations for service
accessibility.
installations for service
accessibility.
If heat sources are located near
the RH side of the AC combi,
ensure that a minimum distance
of 400mm is maintained.
the RH side of the AC combi,
ensure that a minimum distance
of 400mm is maintained.
Install in accordance with local
body regulations only on horizontal
surfaces and not against
combustible walls.
body regulations only on horizontal
surfaces and not against
combustible walls.
Water connection requirements
- Cold
water
- Flow pressure (2 to 6 bar)
- soft water connection*
- shut-off valve with return flow
- soft water connection*
- shut-off valve with return flow
inhibitor and dirt filter
- water supply R3/4
- R50 waste water connection
- R50 waste water connection
(*Water softener may be required.
Please refer to installation manual
for water treatment values.)
Please refer to installation manual
for water treatment values.)
In line with policy to continually develop
and improve its products, Moffat Limited
reserves the right to change
specifications and design without notice.
and improve its products, Moffat Limited
reserves the right to change
specifications and design without notice.
T E C H N I C A L S P E C I F I C A T I O N S H E E T F O R
BLUE SEAL ELECTRIC COMBI STEAMER
AC SERIES E21AC DD 20 x 1/1GN CAPACITY
AC SERIES E21AC DD 20 x 1/1GN CAPACITY
A = WATER CONNECTION R
3
/
4
(SOFTENED WATER) refer to installation
manual for water treatment values.
manual for water treatment values.
B = WATER CONNECTION R
3
/
4
C = DRAIN CONNECTION Ø50
D = ELECTRICAL CONNECTION ENTRY
E = HIGH/LOW PRESSURE RELIEF VENT
F = OVEN VENT Ø80
D = ELECTRICAL CONNECTION ENTRY
E = HIGH/LOW PRESSURE RELIEF VENT
F = OVEN VENT Ø80
Optional Extras
SC
Core temperature probe
KST21 Extra roll-in trolley to suit 21AC DD
KPT21 Plate banqueting trolley to suit 21AC DD / 60 plates 310mm
CPT21 Thermal cover for plate banqueting system to suit 21AC DD