Справочник Пользователя для Mitsubishi Electronics SW2D5C-GTD2-E
8 - 11
8.6 Error Code and Error Message List
8.6.1 GOT error code list
8.6.1 GOT error code list
337
File output failed. Confirm
output file path.
output file path.
Either of the following folder or file with the name same as the
file to be created exists in the storage destination memory
card.
1. Folder storing data
2. Write-protect file
Delete the above folder or file, or change the name of the file
to be created.
file to be created exists in the storage destination memory
card.
1. Folder storing data
2. Write-protect file
Delete the above folder or file, or change the name of the file
to be created.
340
Printer error or power
failure
failure
Printer is faulty or the printer power supply has not been
turned on.
1. Confirm the printer.
2. Turn on the power supply of the printer.
turned on.
1. Confirm the printer.
2. Turn on the power supply of the printer.
341 Printer error
Printer is faulty or the printer power supply has not been
turned on.
1. Confirm the printer.
2. Turn on the power supply of the printer.
turned on.
1. Confirm the printer.
2. Turn on the power supply of the printer.
342
External power is not
supplied to external I/O
unit
supplied to external I/O
unit
Error occurred at the external I/O interface module.
1. If an external power supply (24VDC) is not supplied, supply
1. If an external power supply (24VDC) is not supplied, supply
the external power supply.
2. If an external power supply is supplied, replace the external
I/O interface module.
343
External I/O unit
installation error. Check if
firmly installed.
installation error. Check if
firmly installed.
The external I/O interface module is not installed correctly.
Install the external I/O interface module correctly.
Install the external I/O interface module correctly.
345
BCD/BIN conversion error
Correct data
Correct data
The BCD/BIN conversion disabled data is being displayed/
input.
1. Change the device data to be displayed to the BCD value.
2. Correct the input value to the 4 digits integer.
input.
1. Change the device data to be displayed to the BCD value.
2. Correct the input value to the 4 digits integer.
351
Recipe file error. Confirm
content of recipe file.
content of recipe file.
The contents of the recipe file are not normal.
1. Confirm the contents of the recipe files in the memory card.
2. Reboot the GOT after deleting the recipe file in the memory
1. Confirm the contents of the recipe files in the memory card.
2. Reboot the GOT after deleting the recipe file in the memory
card (format).
352
Recipe file make error.
Reboot GOT after
inserting memory card.
Reboot GOT after
inserting memory card.
Failed to generate recipe file.
Reboot the GOT after installing the memory card.
Reboot the GOT after installing the memory card.
353
Unable to write Recipe
file. Confirm memory card
is inserted.
file. Confirm memory card
is inserted.
Failed to write in the recipe file.
1. Confirm the write-protection of the memory card.
2. Confirm the contents of the memory card.
3. Do not pull out the memory card while recipe is operating.
1. Confirm the write-protection of the memory card.
2. Confirm the contents of the memory card.
3. Do not pull out the memory card while recipe is operating.
354 Recipe file write error
Error occurred while writing in the recipe file.
Do not unplug the memory card while recipe is operating.
Do not unplug the memory card while recipe is operating.
355 Recipe file read error
Error occurred while writing in the recipe file.
1. Do not unplug the memory card while recipe is operating.
2. Confirm the contents (device value) of the recipe file in the
1. Do not unplug the memory card while recipe is operating.
2. Confirm the contents (device value) of the recipe file in the
memory card.
Error
code
Error message
Action
Channel
No.
storage