Справочник Пользователя для Vulcan-Hart ML-136421

GRM SERIES GAS FRYERS

VULCAN-HART F-31233 Rev. F (January 2008)

-23-

THERMAL OVERLOAD PROTECTION BUTTON:

The motor/pump supplied with the filtering system
has a thermal overload protection circuit that senses
when excess heat occurs due to filtering for long
periods of time or under heavy load prior to
discarding debris buildup. If the thermal overload
protection is tripped, wait 5 minutes and then reset
the motor by pushing in the red button. The arrow in
Figure 7 shows the location of the reset button;
located on the front off the motor / pump facing
towards you.

Fig. 7

MAINTENANCE

Hot oil and hot parts can cause burns. Use care when operating,

cleaning, and servicing the fryer.

Spilling hot fryer compound can cause severe burns. Do not

move fryer without draining all frying compound from the tank.

FLUE VENT INSPECTION

When the fryer is cool, inspect annually. Check the flue and clear any obstructions.

Service in the US and Canada

Contact your local Vulcan-Hart Service office or address on the front of this manual.

In Australia

Contact Hobart Food Equipment PTY. LTD., 16 Hilly Street Morlake, N.S.W. 2137 Australia;
P.O. Box 100, Concord N.S.W. 2137; Tel: (02) 9736 1200; Fax: (02) 9736 1555.