Справочник Пользователя для Oster 155876

  A.   Speed  Dial – Turn dial clockwise to choose from manual speed

settings from “Low” to “High”. Once you select a speed, the blender
will run until you turn it back to “Off.”

  B.   Programmed  Settings – In order to activate the programmed buttons,

first turn the speed dial counter-clockwise to the Programmed/Pulse
Setting. Then select the programmed button you would like to use.
They have been developed for optimal use when blending those types
of foods.  
Soup: 20 second ramp up to “Medium”, 5 minutes on “High”. 
Dips/Spreads: 2 (10-second) pulses at “Medium-low”, 30 seconds on “High”.

  Smoothie: 10 seconds to ramp up to “Medium”, 20 seconds on “High”.
  NOTE – if you would like to stop the blender in the middle of a

   programmed cycle, simply press any button.
  C.   Pulse – Turn the speed dial counter-clockwise to the Programmed/

Pulse Setting. Then press the “Pulse” button for the desired time.

  D.   LED  Lights – the lights around the selected programmed buttons will

pulse when the unit is operating in that mode.

  E.  Flashing Light – When speed dial is turned to the Programmed/Pulse

setting, the Pulse button light will flash red to indicate the unit is ready
to operate. Warning: Flashing light indicates ready to operate. Do not
touch the blade.