Справочник Пользователя для Electrolux EK 5701

Electrical connections

Any electrical work required to install

this cooker should be carried out by a

qualified electrician or competent

person, in accordance with the current

regulations.

THIS COOKER MUST BE EARTHED.

The manufacturer declines any liability

should these safety measures not be

observed.
This cooker is designed to be connected to

a 230-240V 50Hz AC electrical supply.
Before switching on, make sure the electricity

supply voltage is the same as that indicated on

the cooker rating plate. The rating plate is located

on the oven frame.

The cooker is supplied with a 3 core flexible

supply cord incorporating a 3amp plug fitted. In

the event of having to change the fuse, a 3amp

ASTA approved (BS 1362) fuse must be used.

Should the plug need to be replaced for any

reason, the wires in the mains lead are coloured

in accordance with the following code:

Green and Yellow- Earth

Blue

- Neutral

Brown

- Live

Connect the green and yellow (earth) wire

to the terminal in the plug which is marked
with the letter 'E' or the earth symbol

or coloured green and yellow.

Connect the blue (neutral) wire to the

terminal in the plug which is marked with

the letter 'N' or coloured black.

Connect the brown (live) wire to the

terminal in the plug which is marked with

the letter 'L' or coloured red.

Upon completion there must be no cut, or stray

strands of wire present and the cord clamp must

be secure over the outer sheath.

A cut off plug inserted into a 13 amp

socket is a serious safety (shock)

hazard. Ensure that the cut off plug is

disposed of safely.

Permanent Connection

In the case of a permanent connection, it is

necessary that you install a double pole switch

between the cooker and the electricity supply

(mains), with a minimum gap of 3 mm. between

the switch contacts and of a type suitable for the

required load in compliance with the current

electric regulations.

The switch must not break the yellow and green

earth cable at any point.

Ensure that the cooker supply cord

does not come into contact with

surfaces with temperatures higher than

50 deg. C.

FO 0390