Справочник Пользователя для Electrolux EK 5701

Operation

Hob burners

To light a burner, push in and turn the relevant

control knob anticlockwise to maximum position.

At the same time push the electric ignition button

which is marked with a little spark. Then adjust

the flame as required.

If the burner does not ignite, turn the control knob

to zero, and try again.

When switching on the mains, after

installation or a power cut, it is quite

normal for the spark generator to be

activated automatically.

To ensure maximum burner efficiency, you

should only use pots and pans with a flat bottom

fitting the size of the burner used (see table).

Burner

minimum

maximum

diameter

Large (rapid)

180 mm.

260 mm.

Medium (semi-rapid) 120 mm.

220 mm.

Small (Auxiliary)

80 mm.

160 mm.

If you use a saucepan which is smaller

than the recommended size, the flame

will spread beyond the bottom of the

pan, causing the handle to overheat.

As soon as a liquid starts boiling, turn

down the flame so that it will barely keep

the liquid simmering.

Take care when frying food in hot oil or

fat, as the overheated splashes could

easily ignite.

If the control knobs become difficult to

turn, please contact your local

Electrolux Service Centre.