Справочник Пользователя для Husqvarna HEDGE TRIMMER ATTACHMENT
English –
11
MAINTENANCE
Weekly
maintenance
maintenance
1. Fill the gearbox with
grease. This should be
carried out after approxi-
mately every 20 working
hours.
carried out after approxi-
mately every 20 working
hours.
2. Check that the bolts
keeping the blades
together are tightened.
together are tightened.
Maintenance schedule
Below follows some general maintenance instructions.
If you need further information please contact your service
workshop.
If you need further information please contact your service
workshop.
Daily maintenance
1. Check that the blades do
not rotate while idling or
when the choke is in the
start position.
when the choke is in the
start position.
2. Check that the hand
guard is not damaged.
Replace the guard if
damaged.
Replace the guard if
damaged.
1
2
1
2
A
B
Technical data
Weight
Weight without fuel, Lbs/kg
Weight without fuel, Lbs/kg
Blades
Length, mm
Blade speed, Cut/min
Length, mm
Blade speed, Cut/min
TECHNICAL DATA
2,0
550
4184
4184