Справочник Пользователя для Ryobi 2075r

• Wear safety glasses or goggles and

ear/hearing protection at all times when
operating this unit. Always wear a face 
or dust mask if the operation is dusty.

• Dress properly. Do not operate this unit 

when barefoot or wearing open sandals.
Always wear sturdy, rubber-soled footwear.
The use of gloves and long pants are
recommended.

• Do not wear loose fitting clothing or articles

such as scarves, strings, chains, ties, etc.
because they could get drawn into the air
intake. Also make sure long hair does not 
get drawn into the air intake. Long hair must
be pulled back and secured off shoulders
and neck.

• The string guard must be in place at all times

while operating the unit.

• Before each use, check that the cutting 

head is correctly fixed, that the trigger
returns automatically in neutral position, 
and that the cutting head remains 
stationary when the engine is idling. 

• Before starting, adjust the handle to your size

and make sure that the cutting head is not in
contact with anything.

• Use the unit only in daylight or good 

artificial light.

• Operate this unit only in a well-ventilated 

area outdoors. Carbon monoxide exhaust
fumes can be lethal in a confined area.

• Avoid accidental starting. Be in the starting

position whenever pulling the starting rope.
The operator and unit must be in a stable
position while starting.

• Use the right tool. Do not use this unit for 

any job except for which it is intended.

• Do not overreach. Keep proper footing and

balance at all times.

• Always hold the unit with both hands when

operating. Keep a firm grip on both the 
front and rear handles or grips.

• Keep hands, face, and feet away from all

moving parts. Do not attempt to touch or
stop the cutting head when it is rotating.

• Do not touch the muffler or cylinder. 

These parts get extremely hot from 
operation and remain hot for a short 
time after the equipment is turned off.

• Read the instructions carefully. Be familiar

with the controls and proper use of the unit.

• Children and adolescents must not

manipulate units, except for adolescents 
in training and under the supervision of 
a specialist.

• All guards and safety attachments must be

installed properly before operating the unit.

• Thoroughly inspect the unit for loose or

damaged parts before each use. Do not 
use until adjustments or repairs are made.

• Carefully inspect the areas to be cut. Remove

all debris that could become entangled in the
string or blade. Also remove any objects that 
could be thrown during cutting.

• Be aware of the risk of injury to the head,

hands and feet.

WARNING: Gasoline is highly flammable and 
its vapors can explode if ignited. Take the
following precautions:

1) Store fuel only in containers specifically 

designed and approved for the storage 
of such materials.

2) Always stop the engine and allow it to 

cool before filling the fuel tank. Never 
remove the cap of the fuel tank, or add 
fuel, when the engine is hot.

3) Pressure can build up in the fuel tank. 

Loosen the fuel tank cap slowly to relieve 
any pressure in the tank.

4) Add fuel in a clean, well-ventilated area. 

Wipe up any spilled fuel immediately. If 
fuel has been spilled, avoid creating a 
source of ignition or starting the engine 
until fuel vapors have dissipated.

5) Ensure correct fuel or fuel/oil mixture is 

used. Never operate the unit without the 
fuel cap securely in place.

6) Move the unit at least 10 feet (3 m) 

from the fueling point before starting the 
engine. Do not smoke, keep sparks and 
open flames away from the area while 
adding fuel or operating the unit.