Справочник Пользователя для I.C.T.C. Holdings Corporation 1150GSD

4 

ALWAYS set trigger lock on gun in "LOCKED" position when not in use, with gun locked close. 

ALWAYS check connections and fittings for tightness before operating the unit.  

ALWAYS locate the unit in a well ventilated area a minimum of 25 feet from the spray area.  

ALWAYS ground the unit, the paint containers, and the object being sprayed to eliminate static    
discharge. Ensure that all these objects remain grounded throughout the entire spraying operation. 

ALWAYS use accessories and components approved for at least 3000 psi (working pressure) in the 
spraying system.                                                                                 

ALWAYS use accessories and components supplied by H.E.R.O. Industries Ltd., or specifically     
approved in writing by H.E.R.O. Industries Ltd. on with the unit.                                   

ALWAYS examine accessories for wear or damage before operating the unit.                      

ALWAYS use lowest possible pressure when flushing and cleaning the unit, and hold the gun firmly 
against a metal container to reduce static discharge possibility.                               

ALWAYS wear a face filter mask when operating the unit.                                 

ALWAYS ;  

         1. Turn off the engine. 
         2. Turn the engine switch to “OFF” position.  
         3. Relieve all pressure in the pump by triggering the gun.    
         4. Lock gun trigger in "LOCKED" position, with gun locked closed before attempting to perform                 
             any maintenance or service on any part of the unit spray system.                               

ALWAYS wear safety glasses when operating the unit.                                            

ALWAYS ensure fire extinguishing equipment is readily available and properly maintained in the spray 
area.                                                                                       

ALWAYS observe good housekeeping and keep the spray area free from obstructions.             

ALWAYS be aware that certain chemicals may react with aluminum, carbide, or other components in 
the pump system. Read the manufacturer's label on all materials to be sprayed, and follow the   
manufacturer's recommendations. If in doubt, consult your material supplier to be sure.             

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

                                 H.E.R.O. AIRLESS SPRAY PAINTING 
 

Welcome to the world of H.E.R.O. airless paint spraying. We are sure you will enjoy owning and operating 
your new H.E.R.O. model 1150GSD. With H.E.R.O. airless spray equipment you will avoid the