Справочник Пользователя для Socket Mobile Series 7
How Do I Scan Data into My Application?
1. Start the Symbian application that you want to receive the data
(e.g., Notes). Make sure a document or spreadsheet is open.
2. Make sure the application is in Number Mode. The status bar near the
top of the screen will display Abc if it is in Alpha Mode, and 123 if it
is in Number Mode. To change the mode, press the text entry button
and select Number mode.
is in Number Mode. To change the mode, press the text entry button
and select Number mode.
3. Press the trigger button and scan the code. For example, try this bar code:
When data is read and transmitted to your phone, the laser will turn off.
Depending on the settings you chose in the Socket CHS configuration
tool, the scanner may beep and/or the LED may flash green. If the
Scanner fails to read data within a few seconds, the laser will turn off,
and you must try again.
Depending on the settings you chose in the Socket CHS configuration
tool, the scanner may beep and/or the LED may flash green. If the
Scanner fails to read data within a few seconds, the laser will turn off,
and you must try again.
20