Справочник Пользователя для Kodak 9090DC

B-16

A-61662  October 2011 

Imprint Patch Code Sheets — enable this option if you want to print 
on patch code sheets and count them with the index counter. This 
setting only applies to patch types 1, 2, 3, 5, and 6. Patch types 4, 7, 8 
and 9 will not get printed or counted even with this checkbox selected.

The Increment on Patch Code and Reset on Patch Code options are 
only for the Kodak Ngenuity 9150 Scanner.

 

Set these options if you 

want to use patch sheets within a batch to control printer index values.

A set of patch codes can be found on the Installation CD or on the 
website at www.kodak.com/go/scanners; under Support>User 
Manuals. 

Enable — select this checkbox to increment the index count value 
when the specified patch code is detected instead of incrementing the 
index count on each page.

Patch Code: select the Patch Code Type that will increment the index 
counter when Increment on Patch is enabled.

Enable — select this checkbox to reset the index count value to the 
Reset Count value when the specified patch code is detected. 

Reset Count: the index count value that takes effect when the Reset 
Patch Code is detected when Reset on Patch is enabled.

Patch Code: select the Patch Code Type that will reset the index 
counter when Reset on Patch Code is enabled.

Changes to the index count value due to Increment on Patch and Reset 
on Patch will take effect regardless of whether Imprint Patch Code 
Sheets is selected. For more information and samples of Patch Codes, 
see Appendix E, Patch Code Information.