Справочник Пользователя для Lucent Technologies Release 8.2

Скачать
Страница из 524
Configuration 4:  R8csi <—ISDN—> R8si Gateway 
<—ppp—> R8csi 
3  
C-LAN Administration
Administration for Network Connectivity
CID: 77730
555-233-504 — Issue 1 — April 2000
126
Switch 1 Task — Assign Node Names
This task assigns node names and IP addresses to each node in the network. This 
screen is administered on Switch 1. A Node Names screen must be administered on 
each switch in the network.
The node names and IP addresses in any network should be assigned in a logical and 
consistent manner from the point of view of the whole network. These names and 
addresses should be assigned in the planning stages of the network and should be 
available from the customer system administrator or from a Lucent representative.
Note:
Enter node names for Intuity AUDIX and MSA adjuncts on page 1. Enter 
node names for switches, routers, and CMS starting on page 2.
Begin
Steps
> Open Node Names form — enter  
ch node-n
> Go to page 2.
> Enter values.
> Submit the screen
End
change node-names
                                                                    Page 2 of 6
                                 NODE NAMES
   Name              IP Address          Name 
IP Address
default_________
0__.0__.0__.0__ _______________
___.___.___.___
node-1
 __  192.168.10_.101  
 _______________    ___.___.___.___
node-3___        192.168.10_.103  
 _______________    ___.___.___.___
________________  ___.___.___.___  
 _______________    ___.___.___.___
Field
Conditions/Comments
Name
Enter unique node names for the following 2 nodes:
C-LAN PPP port on Switch 1
C-LAN PPP port on Switch 3.
IP Address
The unique IP addresses of the nodes named in the previous 
field.