Справочник Пользователя для Lucent Technologies Release 8.2

Configuration 5A: R8csi <—ppp—> R8r (one C-LAN)
<—ethernet—> R8si

C-LAN Administration

Administration for Network Connectivity

CID: 77730

555-233-504 — Issue 1 — April 2000

148

Switch 1 Task — Assign Node Names

This task assigns node names and IP addresses to each node in the network. This
screen is administered on Switch 1. A Node Names screen must be administered on
each switch in the network.

The node names and IP addresses in any network should be assigned in a logical and
consistent manner from the point of view of the whole network. These names and
addresses should be assigned in the planning stages of the network and should be
available from the customer system administrator or from a Lucent representative.

Note:

Enter node names for Intuity AUDIX and MSA adjuncts on page 1. Enter
node names for switches, routers, and CMS starting on page 2.

Begin

Steps

> Open Node Names form — enter

ch node-n

> Go to page 2

> Enter values.

> Submit the screen

End

change node-names
Page 2 of 6
NODE NAMES

Name IP Address

default_________

0__.0__.0__.0__ _______________

___.___.___.___

node-1-ppp______ 192.168.10_.130

_______________ ___.___.___.___

node-1-eth

__ 192.168.10_.128

_______________ ___.___.___.___

node-2____

192.168.10_.12_

_______________ ___.___.___.___

node-3____

192.168.10_.129

_______________ ___.___.___.___

Field

Conditions/Comments

Name

Enter unique node names for the following 4 nodes:

•

C-LAN PPP port on Switch 1

•

C-LAN Ethernet port on Switch 1.

•

C-LAN PPP port on Switch 2

•

C-LAN Ethernet port on Switch 3

IP Address

The unique IP addresses of the nodes named in the previous field.