Справочник Пользователя для Lucent Technologies Release 8.2
Configuration 5B: R8csi <—ppp—> R8r (2 C-LANs)
<—ethernet—> R8si
<—ethernet—> R8si
199
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000
CID: 77730
3
C-LAN Administration
Switch 3 Task — Assign Link via ethernet Data Module to the LAN
This task administers an ethernet data module on Switch 3 for the ethernet connection
to Switch 1. The data module associates a link number with a port address, extension
number, and node name for the C-LAN port used for this connection.
to Switch 1. The data module associates a link number with a port address, extension
number, and node name for the C-LAN port used for this connection.
Begin
Steps
> Open Data Module form — enter
a da n
> Enter values
> Submit the screen
End
add data next
Page 1 of X
Page 1 of X
DATA MODULE
Data Extension: 3901
Name: ethernet on link 1
BCC: 2
Type: ethernet
Port: 01a0517_
Link: 1
Port: 01a0517_
Link: 1
Network uses 1’s for broadcast addresses? y
Field
Conditions/Comments
Type:
This indicates the data-module type for this connection.
Port:
Ethernet connections must be assigned to port 17 on the
C-LAN circuit pack.
C-LAN circuit pack.
Link:
The link number must be in the range 1 – 25 (for R8si), not
previously assigned on this switch.
previously assigned on this switch.
Name:
Information-only; appears in list generated by the "list data
module" command.
module" command.
Network uses 1’s
for broadcast
addresses?
for broadcast
addresses?
Leave the default (
y
) if the private network contains only
DEFINITY switches and adjuncts. Set to
n
only if the
network includes non-DEFINITY switches that use the 0’s
method of forming broadcast addresses. See Appendix A,
“Data Module - type ethernet” for more information about
this field.
method of forming broadcast addresses. See Appendix A,
“Data Module - type ethernet” for more information about
this field.